You came home from a long weekend to a failed water heater and a hallway carpet that squishes under your feet. Restoration is not just drying it out. It is extraction, drying, demolition, and rebuilding, done in the right order so nothing gets sealed up wet.
One free call connects you with an independent local specialist. Areas served include zip codes 54113.

We are a referral line, not a contractor. Your call is routed to an independent local restoration company that can take the job from the first moisture reading to the final walkthrough, which saves you from managing three or four different trades.
When the same contractor dries the house and rebuilds it, nobody can blame the other company for a problem. You get one estimate and one schedule.
Restoration contractors commonly write estimates in Xactimate, the same software most insurance adjusters use, so line items for flood cuts, drying days, and baseboard replacement match what your carrier expects.
Reconstruction sometimes requires permits. Ask the contractor for license and insurance proof up front, and confirm who is pulling any permits your job needs.
Because the contractors already work around Combined Locks, they can usually get mitigation started the same day, which limits how much material has to be torn out later.

Restoration follows a set order. Skipping a step, like closing up walls before the framing is dry, is how mold ends up behind brand new drywall six months later.

Stopping the source, extracting standing water, and setting up drying equipment to keep damage from spreading. This phase is about saving as much of the original structure as possible.
Wet drywall is cut at a straight line, often two or four feet up, to expose framing for drying. Swollen MDF baseboards, saturated insulation, and delaminated cabinet toe kicks come out too.
Furniture, rugs, and boxes get moved, blocked up on foam pads, or packed out to storage so they are not ruined while the floors dry. Each item is inventoried for your claim.
New drywall is hung, taped, and textured to match. Baseboards, casing, and paint go back on, and outlets and switches are reset to code.
Carpet may be re-stretched with new pad, hardwood may be sanded and refinished after drying, and laminate that swelled at the seams is usually replaced.
Call +1-877-637-9008 and explain what failed, how long water sat, and which rooms are affected. That helps route you to a full-service restoration pro.
The contractor calls you with an arrival window and talks you through shutting off the water heater or main valve if it is still leaking.
Expect moisture readings, photos, a sketch of affected rooms, and a written scope that covers both drying and rebuild before any demo begins.
Once readings confirm everything is dry, reconstruction starts. A final walkthrough lets you inspect the work before the job is closed out.
Every day of delay adds demolition to the bill.
We were out of town for four days when the water heater let go. The contractor dried the house, cut the drywall two feet up, and rebuilt the hallway and two bedrooms. Paint matched perfectly.
Rachel D.Water heater failure, full rebuildOne contractor for drying and rebuilding made it simple. Their estimate matched the adjuster's line by line.
Tom H.Insurance claim, kitchen and dining roomThey boxed up the kids' rooms, stored everything, and brought it all back after the new carpet went in. Nothing missing, nothing damaged.
Monique L.Contents pack-out and carpet replacementI wanted the walls closed fast, but they waited for dry readings first. That patience saved me a mold problem.
Greg P.Supply line leak, finished basement

Mitigation is the emergency phase: stopping the water, extracting it, and drying the structure. Restoration includes mitigation plus the rebuild, like new drywall, trim, paint, and flooring.
Drying usually takes three to five days. Rebuild time depends on the scope, from a few days for a single room to several weeks when kitchens or floors are involved.
If the loss is covered, most policies pay for both mitigation and reconstruction. Contractors document everything to support your claim, but your agent can confirm your coverage.
Saturated drywall often cannot be saved, and the cut opens the wall cavity so the studs and insulation dry. It also makes patching cleaner.
Often, yes. Drying equipment is loud and warm, but many families stay home. If sewage, mold, or a large area is involved, the contractor may recommend staying elsewhere for a few days.
No. We connect callers with independent local restoration companies. Please verify license and insurance with the contractor before work starts.

Independent restoration contractors in the network work throughout Combined Locks, WI and nearby communities, including zip codes 54113.
See the nearby cities list below. The dispatcher will let you know quickly if your address falls outside coverage.
