Hydro Jetting For Clogged Drains and Drains

Hydro jetting is a safe and effective way to clear stubborn clogs without the use of chemical drain cleaners. Before using the powerful water jet, a plumber will inspect your pipes with a camera to ensure that they can withstand this intense pressure.

Hydro Jetting

Restaurant plumbing often experiences severe clogs due to FOG (fats, oils and grease) that congeal on the pipe walls. A snake can’t always remove this debris, so hydro jetting is an excellent solution. Visit Website to learn more.

Hydro jetting is a safe technique for pipes when done by a qualified plumber. The focused jets of water clean out anything that is clogging the drain or pipe, including tree roots. The force of the water is similar to that used in a pressure washer, but is directed at the specific area where it needs to be cleaned. The nozzles are designed to not come in contact with the sides of the pipe, so that damage is minimal. It is also a good idea to use the right nozzle for the job, to prevent unnecessary water loss and to avoid over-spray.

The high-powered water can break up clogs that traditional plumbing snakes and augers can’t remove. In addition, it is a better way to get rid of grease, mineral buildup, and other debris that accumulates in the drain and sewer lines. This helps to keep the drain and sewer line flowing smoothly, and it prevents blockages from recurring.

Before the plumber starts to spray the pipes with the water hose, they should inspect the line using a camera. This will reveal any damage to the pipe and help determine which treatment is best. It will also tell them if the pipe is prone to cracking. The plumber can then take measures to protect the pipeline.

If the line is prone to cracking, the plumber may suggest that it be replaced altogether, rather than using hydro jetting. It’s a quick, effective method for clearing clogs, but it’s not suitable for older pipes. The force of the water can rip apart weakened or cracked pipes, which can lead to further problems down the line.

Hydro jetting can also be harmful to the environment, if not performed properly. It is important to understand the risks and to hire a professional plumber to perform this task. They will know how to safely and effectively use the nozzles to protect the surrounding environment and prevent damage. Additionally, they can advise you on what precautions to take to protect yourself and your family from the hazards involved.


Hydro jetting is one of the most effective drain cleaning methods available. It reaches difficult to access areas in your plumbing system, removing debris and blockages and leaving your pipes clean. The pressurized water also makes it much more difficult for grime and clogs to form again. This means you will need to call your plumber less often, saving money in the long run.

Another benefit of hydro jetting is that it is non-invasive. Traditional drain cleaning techniques involve digging up your garden or driveway to access clogged sewer lines, which can be time consuming and expensive. With hydro jetting, your plumber will only need to enter the clogged sewer line through the cleanout and spray the line with high-pressure water.

The power of this water can remove even the toughest clogs, including tree roots. You will also find that it can resolve minor clogs before they become serious problems. If left untreated, these clogs can cause plumbing system failure in the near future. With regular maintenance, you can prevent these clogs by using drain cleaners and hydro jetting.

A professional plumber will always use a video inspection to determine the root of the problem before beginning any work. Then, they will use the appropriate tools to clear the clog. This can include drain snakes, augers, and hydro jetting. The technician may also recommend the installation of a new sewer line if the old one is too damaged to repair.

Many homeowners use liquid drain cleaner to deal with clogged pipes, but these products only provide temporary relief. Over time, they can leave residue and create a build up of bacteria, which can lead to a backed-up sewer and contaminated water supply. Hydro jetting is an effective solution that can eliminate clogs and keep your pipes clean for a long time.

Clogged drains and sewer lines can be a huge nuisance for home and business owners. The clogs can lead to slow drainage, sewage backups, and other issues. Hydro jetting is an effective and safe drain cleaning technique that uses high-pressure water to clean the pipes. It is more effective than other drain cleaning options and is safe for older pipes.


Hydro jetting is an effective solution for clogged pipes and drains. It can clear out a serious blockage in less time than other methods. This method also leaves your plumbing system in better condition. It is a safer option than traditional plumbing methods because it uses high-pressure water rather than harsh chemicals. However, it is important to hire a plumber with experience in this technique. If the plumber is inexperienced, it could damage your pipes or worsen the problem.

Hydro Jetting is a safe and effective way to clean your drain lines, but it’s important to make sure that the plumber you hire is qualified and has the proper equipment. Before starting the process, the plumber should perform a video inspection of your pipes to locate the clogs and determine whether they can withstand the intense pressure of the jet of water.

A clogged drain can cause a number of problems, including foul odors and raw sewage back-up. It can also lead to costly repairs or replacements for your pipes. Hydro jetting is an efficient and cost-effective way to clean your drains. It uses a stream of water to remove debris from your pipes, and it can even dislodge tree roots. In many cases, it’s the best solution for clogged pipes because it can be done quickly and is safer than other plumbing techniques.

HB Home Service offers professional sewer cleaning services to prevent your pipes from becoming blocked. We can help you find the root of your clog and get it fixed as quickly as possible. Call us today to learn more about our services.

During the hydro jetting process, a plumber will insert a flexible tube down the pipe and turn on the water. The high-pressure water will then clean the inside of the pipes, removing any buildup or clogs. The process may take up to three hours, depending on the severity and location of the clog. The cost of the service will vary based on the size and location of the clog, as well as the condition of your drain pipes. The cost will also increase if additional equipment or labor is required to access difficult-to-reach pipes. In addition, extra precautions may be needed for older pipes.


When you have a severe clog that hasn’t responded to store-bought drain cleaners or a snake, it may be time to call in the big guns. A reputable plumber will use hydro jetting to blast high-pressure water through your plumbing pipes, breaking up the blockage and leaving your drains clean. Hydro jetting costs more upfront than other cleaning procedures, but it’s a surefire way to get your drains flowing again. Plus, if you regularly schedule hydro jetting services, it can prevent future clogs and reduce your need to call for help.

How much it will cost to hydro jet your sewer line depends on the size and severity of the clog. Severe clogs are often more complicated to remove than smaller ones, and they can take longer to clear. Also, the location of the clog can influence the price. Sewer lines that are far from the drain cleanout will cost more to access than those closer to it.

In addition to the cost of the actual hydro jetting, you’ll also need to consider the cost of the plumbing service’s labor. A professional plumber will have to spend time preparing for the job and gaining access to your sewer line, which can add up quickly. They typically charge an hourly rate between $45 and $200, which will be on top of the hydro jetting cost.

The best way to keep your drains and sewer lines in good condition is to prevent them from becoming clogged in the first place. Use drain screens and avoid pouring grease, oils, and other solids down your drains. Regularly schedule hydro jetting services, and be sure to clean them on a regular basis. This will ensure that your pipes are free of grime and debris and will work well for a long time.

While attempting to DIY Hydro jetting can save you money, it’s not a good idea. This process requires a lot of training and skill, and it can cause serious damage to your pipes. A plumbing professional will know how to do it correctly and safely, saving you a costly repair bill in the future.

Faucet Repair – How to Stop a Leaking Faucet

If you have a leaking faucet, a replacement is a smart investment that may be less costly than waiting for the problem to worsen. Faucet repair is typically a simple matter of taking apart and reassembling the handle and internal parts, depending on your type of faucet.

Faucet Repair

Stretch a length of measuring tape between the mounting holes for your faucet and write down the measurement. This will help you determine the appropriate height and reach measurements for your sink and countertop. For professional assistance, call Joe’s Plumbing now!

Faucet leaks are a common problem and can happen to any faucet. Luckily, they’re usually easy to fix. Leaks often occur because of mineral buildup or worn seals. A few simple steps can fix most leaks, but if you’re having trouble, a professional plumber should inspect your pipes and make any necessary repairs.

Start by drying the faucet and checking for wet spots on the floor or ground around it. A wet spot indicates the faucet is leaking at its base or somewhere underneath it. If the leak is below the sink, it’s most likely a loose screw or a broken packing nut at the base of the valve stem. A screwdriver and a wrench should be enough to remove the screw or nut.

The next step is to check the cartridge or stem to see if it needs replacement. The movable part in most faucets controls the flow of water by pushing or pulling on a ball or disc inside a socket. A faulty cartridge can cause problems with hot and cold water mixing or even stop water from flowing at all. If you find a leak here, the best thing to do is replace the O-rings or washers and use plumber’s grease on them.

Once you’ve cleaned the cartridge and replaced the O-rings, reassemble the faucet. Make sure to put the adjusting ring back on, tightening it clockwise with the spanner tool provided in the repair kit. If the water is still leaking around the handle, it’s time to replace the seat and springs.

Depending on whether your faucet is a cartridge, ball or ceramic-disk type, the process will vary slightly. Cartridge faucets require you to remove the decorative handle cover and the screw beneath it. This is a good opportunity to clean the handle and its decorative cover, too. Then, use an Allen wrench to remove the handle screw and pull or pry it off. Be careful not to bang the handle free; it may stick because of corrosion. If it’s stuck, try wiggling it back and forth while trying to pry it off.

Check the Valve

There are a few places that can cause water to leak out of your faucet. Usually, it’s the result of internal parts that wear down over time like the inner seal, washer or O-ring. But sometimes it’s the result of loose fittings or a broken fitting somewhere else in your plumbing line. In either case, a simple fix is often all it takes to stop the problem.

Check the connections between the base of your faucet, the handles and the water supply lines. Periodically tighten any loose ones, but be careful not to overtighten as this can damage your faucet. Ensure the valves on your water supply are fully open and that any rubber seals around the base of your faucet are still water-tight. These can wear out over time due to age and exposure to hard water, and replacing them is an easy do-it-yourself repair job that should be done periodically.

Another common reason for leaks is corrosion, which can create small crevices that allow water to seep through. Regularly cleaning your faucet and particularly the screw threads where mineral buildup tends to collect, can help prevent this.

The valve seat is the other area that can be problematic if it’s worn out, damaged or corroded. It’s a good idea to pour white vinegar over the valve seat, let it sit and scrub it occasionally to keep this part in good working order.

In both cases, you’ll also want to make sure the O-ring is in good condition. This is a little easier to replace since you can do this while the faucet is disassembled. Once you’ve replaced the O-ring, reassemble your faucet in reverse order from when you took it apart and be sure to insert the cartridge stem up before the retaining clip (if there is one).

If you have a ceramic-disk cartridge faucet, you’ll need to reinstall the cleaned neoprene seals in the base of the disk cylinder. This is a good time to make sure the seals are in good shape, and it’s a good idea to bring the old ones with you to the hardware store when buying replacements so you can be sure to get the right type.

Check the Seals

The washers — which are small rubber or metal discs that create a watertight seal — in the faucet handle can break down over time, causing leaks. Inspect these for signs of wear or damage, and replace them as needed. Washers are often the first part to wear out, and they’re also easily damaged by exposure to hot water or chemicals.

The seat washer — located at the bottom of the stem and pressed against by the handle to close the valve — can also wear out or develop cracks, resulting in leaks. This washer is usually held in place with a screw, which you can remove with a flathead screwdriver to expose the seat washer underneath. If the seat washer is damaged, you can replace it with a new one by unscrewing the old washer and screwing the replacement in place.

You can also repair leaks caused by a worn-out cartridge by replacing the seals. This is a simple and inexpensive fix, but it’s important to know the type of faucet you have — Cartridge, ball, or ceramic-disk — because each model uses different parts.

If the faucet is a Cartridge model, you can remove the cartridge to inspect the O-rings and replace them as necessary. You can also replace the entire cartridge if it’s damaged or worn. A ceramic-disk faucet, on the other hand, has a dome-shaped cylinder that sits beneath the handle and contains neoprene seals. To get to these seals, push the faucet handle back to access a set screw and remove it. You can then unscrew the escutcheon cap and the disk cylinder mounting screws, and lift out the cylinder. Then, you can remove the neoprene seals and replace them with a fresh pair.

Before replacing the seals, make sure all the components are free of mineral deposits by cleaning them with a rag or sponge soaked in distilled white vinegar and water. You can also use penetrating oil to loosen rust or sediment stuck in the screw threads of the faucet’s handle. When reassembling the faucet, put the parts back in the order you removed them so that they’re easy to find when you need to replace them.

Replace the Seals

Whether your faucet is a rotary, ceramic disc, or cartridge style it is important to figure out where the leaks are coming from in order to make the repair. If it is from the spout, then a new valve seat or O-ring may be needed. If it is a cartridge, then the seals may be worn out and need to be replaced. If you are unsure, it is best to consult a plumber or take the faucet apart and remove the seals for inspection.

Before you begin, shut off the water supply to the faucet using the valves under the sink. If you don’t have access to these, turn off the water at the main valves in your home. Turning off the water will also allow the faucet to drain completely and prevent any leftover water from leaking or rusting any of the parts.

Next, you will need to disassemble the faucet handle and replace any faulty parts. Start by removing the decorative cap on the handle with a screwdriver and then loosening the handle screw and pulling the handle off. Use penetrating oil if the screw is corroded or stuck to help break up any rust or sediment that could be blocking it.

Once the handle is removed, you can see the stem and the large six-sided nut that holds it in place. You will need a wrench to loosen and then unscrew this nut, but it can be tricky to get the handle to come off. Be sure to keep track of the screw and nut so you can reassemble the faucet correctly.

Now you will need to remove the retaining clip and the dome assembly under the handle, as well as the metal handle adapter and plastic pivot stop. If the stem nut is tight, you can loosen it with a wrench and then lift out the entire stem assembly. Be careful not to lose the o-ring that connects the stem to the cartridge as it will need to be replaced when you reassemble the faucet. You can replace the o-ring with a sanitary o-ring from a plumbing supply store. If you need to, you can use plumber’s grease to help the o-ring seat properly.